table 2
several weeks later we returned to joe and mary's. the slab was set. and i had time to build a pair of fairly complex molds for the table legs. the legs were roughly 50 cms by 90 cms by 20 cms. but they had gear like teeth on one side. hence the complications. also at this time i built a plywood retaining wall for the inside of the grave. and filled the outside of it to be slightly higher than it started. i kept having to reinforce the wall because it wasn't anywhere near as sturdy as it needed to be. now we had a rectangular hole in the ground with a nice flat concrete slab at the bottom. and two table legs curing. so far so good. joe did some stuff too.